Celestron Origin Bedienungsanleitung Seite 5

Troubleshooting
The WiFi logo in the upper left corner can help you connect
(Figure 2). If Origin doesn't automatically connect to your
smart device, press the WiFi logo and select "Connect. "
Alternatively, you can choose "WiFi Settings, " and the app
will take you to the Menu>Settings>WiFi Settings screen,
where you have additional connection options, including the
Run Network Quick Setup Quick Start option, which loads the
Quick Setup Guide screens.
Figure 2: The WiFi logo in the upper left corner of the Planetarium View can
help you get connected.
I N ST R U CT I O N MA N UA L
Initialization
Once Origin connects via Direct or Network Connect mode,
initialization begins automatically. Origin will point itself up,
then focus itself. Then, it will move around and align itself with
the night sky.
During initialization, you can follow along with the
Picture-in-Picture within the Planetarium View or Camera
View. You'll see the stars focusing as Origin focuses, and stars
streak by as Origin slews across the sky. Once initialization is
complete, Origin will report "Ready to Image. "
Of course, if you connect to Origin during the day, it will fail
initialization, as it needs to see stars to focus and determine
where it is pointing. Origin will only initialize successfully when
the sky is suffi ciently dark.
If you wish to cancel initialization, press the "Cancel
Initialization" bar at the top of the screen. Remember that
Origin will not work at night until initialization with the sky is
complete.
After initialization, the next step is to select an object
to image.
C E LEST R O N O R I G I N |
3