Celestron Origin Bedienungsanleitung Seite 10

2. Your First Night Out with Origin
Here are the steps to follow for basic operation:
1. Download the Celestron Origin app from the Apple App
Store (iOS) or Google Play (Android).
2. Place Origin outside, where it has a clear view of the sky.
3. Turn on Origin.
4. Open the app.
5. Directly connect to Origin's WiFi network.
6. If Origin is within range of your home WiFi network, set up
Origin to connect through your home network.
a. The next time you launch the app, it will automatically
check the home network to see if it can fi nd Origin. You
won't need to set up a connection through your home
network again.
7. Once connected, Origin will autofocus and orient itself to
the night sky (i.e., initialization). This process takes about
90 seconds.
8. Select an object to view from the Planetarium View by
tapping one of the highlighted objects onscreen.
9. Slew Origin to the selected object by pressing the
crosshairs icon to the right in the Object Info bar at the
bottom of the screen (refer to Figure 4).
Low Bandwidth Warning Low Bandwidth Warning
If the bandwidth between your mobile device and Origin becomes less than 0.2 MB/sec, the Low Bandwidth warning If the bandwidth between your mobile device and Origin becomes less than 0.2 MB/sec, the Low Bandwidth warning
will appear, and you may notice that images take longer to download. If this happens when directly connected to will appear, and you may notice that images take longer to download. If this happens when directly connected to
Origin, we recommend moving your device closer to Origin (i.e., within 10 feet). If you receive a Low Bandwidth Origin, we recommend moving your device closer to Origin (i.e., within 10 feet). If you receive a Low Bandwidth
warning while connected to Origin through a home network, you may need to move Origin and/or your smartphone warning while connected to Origin through a home network, you may need to move Origin and/or your smartphone
closer to your WiFi router, reboot your router and reconnect, purchase a WiFi extender, or upgrade your WiFi router. closer to your WiFi router, reboot your router and reconnect, purchase a WiFi extender, or upgrade your WiFi router.
Consult Appendix A in this manual for more information. Remember, you can always use Direct Connect mode if you
Consult Appendix A in this manual for more information. Remember, you can always use Direct Connect mode if you
have issues with your home network. have issues with your home network.
8
C E LE ST R O N O R I G I N
|
10. Switch to Camera View by pressing the Camera icon at
the bottom of the screen.
11. Press the Start Imaging button in the bottom center of
the screen (refer to Figure 6). The fi rst image will appear
onscreen in about 10 seconds.
12. Continue observing the image as it gets brighter and more
"burned in" onscreen.
a. You can peruse object info and audio presentations
using the info and speaker icons at the top corners of
the screen.
13. When you are done observing/imaging, press End Imaging.
Origin will download, process, and save the fi nal image to
the gallery and your device's camera roll.
14. Switch back to the Planetarium View by closing the
Camera View. Then select another object to observe and
image.
15. When you fi nish observing for the night, power off Origin
and bring it inside.
a. After switching the power off, Origin takes about 7
seconds to complete its "safe shutdown" routine.
I N ST R U CTI O N MAN UAL