Celestron Origin Bedienungsanleitung Seite 11

3. Status LEDs and Origin Status
Origin has LEDs to provide "status-at-a-glance" functionality
outside of the app, which allows you to check Origin by looking
at its lighting pattern. The status LEDs help you understand
what Origin is doing and assist with troubleshooting.
Status LED Ring
You'll find the Status LED Ring on the back of Origin's rear
cell (Figure 8). The ring has eight individual segments and
provides "status-at-a-glance" functionality. The status LED
ring can also indicate if there is a problem.
Counterclockwise swirl
LED #3 and #7 (left and right) are alternating
Fill in a clockwise direction
All LEDs - repeating stepwise increase in brightness
All LEDs - repeating stepwise decrease in brightness
Pendulum - swinging back and forth
One LED Blinking (top LED)
One LED Blinking (closest to the dovetail bar)
Slow fill from bottom to top
You can find animations of some of the LED ring patterns at https://software.celestron.com/Origin/led-patterns.html
I N ST R U CT I O N MA N UA L
Pattern
Clockwise swirl
Solid ring
Fig. 8: The LED ring on Origin's rear cell provides status-at-a-glance.
Meaning
Origin has established its own network and is waiting for the
mobile app to connect.
Origin has connected to your local WiFi network and is waiting
for the mobile app to connect.
Origin has established a connection with the mobile app and
is awaiting commands.
Origin is busy with a long task (e.g., focusing).
An exposure is in progress.
Origin is booting up.
Origin is shutting down.
Origin is reconfiguring the WiFi network.
A firmware update is in progress.
There is a hardware malfunction.
The hardware is not calibrated.
C E LEST R O N O R I G I N |
9