Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
SAFETY INSTRUCTIONS FOR USE
• Loss and damage incurred due to non-observance of the safety
requirements are not covered by the warranty. The manufactu-
rer is not liable for subsequent damage.
• The receiver may not be used to operate systems / applications
in which the user is not protected by inherent safety functions.
• The manufacturer is not liable for damage or injuries caused by
improper operation or noncompliance with safety provisions. In
such cases, the warranty also expires.
• The receiver is not a toy and is not suitable for children.
• When installing / mounting the receiver, ensure that the connec-
tion cables are not crushed, kinked or otherwise damaged (e.g.
by sharp edges).
• Contact an expert if you have any questions about the operation,
safety or setting up of the receiver.
• Ensure that the receiver is not overloaded, neither mechanically
nor electrically. This can damage the receiver and cause a fire or
electric shock.
• Only use the receiver within the voltage range from 9 to 36 volt
(DC). The load of the entire system may not exceed a maximum
total current of 10 amps. Ensure additional fusing of the power
supply!
• Follow the safety regulations, the relevant laws and warnings of
the respective application / machine manufacturers (dealer, sup-
plier), with which the receiver is used.
4
Werbung
