EN
3. INSTALLATION REQUIREMENTS
Installation, mounting, setting up and operation of the receiver
when tired or under the influence of drugs or medicines
• The receiver may only be installed, mounted, set up and oper-
ated by qualified skilled personnel.
• Improper installation, mounting, setting up or operation can
endanger the user, bystanders or others (depending on the
application) and can cause injuries or damage to personal pro-
perty and the receiver itself.
• When installing and mounting the receiver, ensure that the
work / mounting environment is clean, tidy and dry.
• If possible, install the receiver within sight of the user.
• Do not install the receiver in the immediate vicinity of motors,
relays or mains cables.
• Do not install the receiver on the inside of a metal housing and
always ensure sufficient distance from objects, which could
impair the transmission / reception strength.
• Always observe the supplied wiring diagrams.
• Always use adequately thick, correctly insulated cables that are
suitable for the application area.
• Always connect wires with appropriate and suitable cable con-
nectors.
• The receiver must be fixed with two screws (M5).
• Always observe the relevant safety instructions.
10
WARNING
is strictly prohibited. Follow the safety instructions!