Icarus blue R-BASIC Handbuch Seite 12

EN
5. STARTING UP AND OPERATION
5.1 PAIRING A TRANSMITTER / SMARTPHONE
To activate the pairing mode of the receiver, perform the following
steps:
1. Ensure that the receiver is connected to the power supply and is
switched on. The status LED flashes green slowly.
2. Press „button 1" on the receiver 3 x quickly (within 2 seconds).
3. The status LED starts to flash alternately red and green.
4. Now activate the pairing mode of the ICARUS blue transmitter
that is to be coupled. Please read the corresponding manual.
5. To pair a smartphone, download the corresponding (free)
ICARUS blue app from the corresponding app store and then
follow the step-by-step instructions in the app.
5.2 DELETING / REMOVING A COUPLED TRANSMITTER
Perform the following steps to delete all paired transmitters (inclu-
ding smartphones) from the receiver's memory:
1. Ensure that the receiver is connected to the power supply and is
switched on.
12
Button 1 may only be used in ambient temperatures
> -10°C. Also, the receiver must not be iced over
(see also "Safety instructions for use").
Note that only one device (transmitter or smartphone) can
be connected to the receiver at the same time.
NOTE
NOTE