Walimex Pro StabyFlow Director System Gebrauchsanleitung Seite 29

NOTE
Make sure that the locking pin clicks back into place once the adjustment
has been made.
Adjust the tightness of the vest so that is
fits comfortably. If the vest feels too tight
when breathing, adjust the vest more
loosely.
Insert the pins of the spring arm into the
spring arm holder on the hip plate of the
vest.
Fasten the slide on the adapter of the
spring arm.
Check the spring tension.
Turn the spring adjustment knob to adjust
the required rigidity of the spring arm.
Spring adjustment
knob
walimeSpro
Your Inspiration. Your Chance.
29