Walimex Pro StabyFlow Director System Gebrauchsanleitung Seite 26

6. Panning and rotation
Arrange the steadycam on the stationary
lamp tripod horizontally to test the dropping
movement.
If the slide drops too quickly, correct the
number of weights on the weight block.
If the slide drops too slowly, correct the
length of the steadycam and/or the centre
of gravity of the unit of handle, support and
spring arm receptacle:
Changing the lengths of the steadycam:
For this purpose loosen the fastening
screw for the support length.
Move the rod approx. 1.3 cm towards
the weight block.
Tighten the fastening screw for the
support length.
Changing the centre of gravity of the unit
of handle, steadycam and spring arm
receptacle:
For this purpose loosen the fastening
screw.
Correct the centre of gravity of the unit
of handle, steadycam and spring arm
receptacle or the weight unit.
Tighten the fastening screw.
Repeat the dropping test.
26
walimeSpro
Your Inspiration.
test
Your Chance.