Walimex Pro StabyFlow Director System Gebrauchsanleitung Seite 24

4. Mounting the camera on the steadycam
Plug the steadycam with the handle on a
lamp tripod (optional)
NOTE
Ensure stability of steadycam and lamp
tripod.
Loosen the locking lever for the quick-re-
lease plate.
Pull the unlocking screw towards the
outside.
Remove the quick-release plate by pulling
it forward or backward
Fasten the camera securely on the
quick-release
Slide the quick-release plate with your
camera back
NOTE
Make sure that the unlocking screw thereby
clicks into place.
With the unlocking screw you can move
the camera forward
adjustment. (see also point 5)
Tighten the fastening lever for the quick-re-
lease plate securely.
24
out of the slide.
plate.
on the slide.
or back to ease
walimeSpro
Your Inspiration.
fine
Your Chance.