Bergstrom COMPACT 3.0 Montageanweisungen Seite 17

COMPACT 3.0
7
Connect the other end of the brown wire to point
D (original connection) mass connection.
7
8
In vehicles without original fuse, connect wire (+)
with fuse to point C and wire (-) to point D of the
previous section (figure 7).
8
9
Remove the right side decorative piece if
the vehicle is a left-side drive, or the left side
decorative piece if the vehicle is a right-side drive,
then pass the cabling through the downpipe and
return to the original position.
D
C
17
7
A
8
9
EN
B
D
C