Easyclean System (Oven Cleaning System) - NEFF E 1664 Serie Gebrauchsanleitung

EasyClean ®
d
System
Function selector
The oven cleaning function featured in your oven is
intended to help you keep your oven neat and tidy.
An amount of cleaning solution is vaporised
automatically. The combined effects of heat and
steam soften the soil deposits on the oven wall
enamel and facilitate their removal.
Caution:
Use this function only after the oven has completely
cooled (room temperature).
Use normal water only, and no distilled water.
Activate oven cleaning:
1.
Remove the baking sheet and the universal
baking pan from the oven. The baking grill may
remain in the oven.
2.
Pour approx. 400 ml of water mixed with a little
dishwashing detergent into the floor pan of the oven
cavity.
In the case of heavy soil build-up, you may wish to
allow the cleaning solution to soak in for a while
before you activate the cleaning function.
3.
Close the oven door.
Warning:
The cleaning system can only be activated when
the oven has cooled down completely.
4.
Turn the function selector to the
d
The indicator light and the
for oven temperature illuminate.
If * flashes, the oven has not cooled down
completely.
After the initial heating time (approx. 4 minutes) the
oven temperature control lamp extinguishes.
After a further 17 minutes the program cycle is
completed. A buzzer sounds.
Switching the oven OFF:
Turn the function selector to the 0 position.
d
position.
;
indicator light
* is displayed.
89