DNT WeatherScreen PRO Bedienungsanleitung Seite 73

step 3)
Afteryou havesuccessfullyregistered,
select the "My Devices"menu in your
MemberSettings.
Step 4)
Add a new device via „Add New
Device". To do this, select the type
„other" as PWS (Personal Weather
Station)and click on „Next"
Step 5)
Fill in the information
station.
First, indicate where the station is, so that it is correctly displayed on the map. Next, the required
information must be entered in the fields („required" must be entered!).
O Name:Nameof the station (e.g.dnt WeatherScreenPRO)
O Elevation: Height of the station to sea level (is calculated from the position).
O Device Hardware: Is taken over from step 1 of the device system
O HeightAboveGround:Heightof the weather station from the ground (infeet; Ift is approx.0.3m)
O Surface Type:Indicatesthe undergroundon which the station is located
Member Settings
Add a New
Select a Device
Add a New
about the new
Set Device
Device
PW'S
Name & Location
to
73