Set Longitude/Latitude (Location); Set The Display Background - Dnt Weatherscreen Pro Bedienungsanleitung

- With the Returnkey
Automatic control
Ttrn on the backlight
AM 0630
Ttrn ott the backEqht
10:00
o
- If the automatic display switching is activated,you can pressthe following button
as long as the display is switched on to turn the display off. It will then automaticallyswitch on
again at the programmed switch time.

5.6. Set longitude/latitude (location)

- Pressthe button on the set-up/settings page
and highlighted.Select it with the buttons
for your location.
- Select the hemisphere setting here and configure the longitude and latitude of your location.
You may, for example, find this data on the compass or GPSapp of your smartphone, in your car
navigationsystemor at: http://www.fwiegleb.de/geodat.html.
The entry of two decimals is sufficiently precise. The location data is needed to determine the
local sunrise/sunset
- With thereturn key B, youcanreturn tothesettings m enu.
5.7. Display background
In the background menu, you can choose between a display with a dark or a light background.
, you can return to the settings menu.
Setup
backm
times.
SetLQ
Latitude
NORTH
LonGtude WEST
Automatü:: brightness adißtrrult
WI xintrn bri#ltness
Mrirrurn brightness
until the field "Longitude/Latitude" is reached
This will take youto the set-up/setting menu
0.0000
0.0000
at anytime
67