Configure/Add Room Climate Sensors; Settings Menu "Backlight - Dnt Weatherscreen Pro Bedienungsanleitung

5.4. Configure/Add room climate sensors

- Pres s thebutton ontheset-up/settings
and highlighted. Select it with the buttons
the room climate
- Here you can give each sensor a name, e.g. the location, and enter new sensors:
- Us e thearrow keys tochoose N O
the keypadfor enteringthe name usingthese buttons: o e
- Here, you can select the desired character with the arrow keys and transfer it to the name field
abovethe input field by pressingthe enter key
With „Backspace"
With„Caps Lock"/N youcanchoose b etween b igand small c haracters.
With„Cancel"Z youcangoback without saving a nychanges tothename.
With„OK"/E,youcanconfirm thename, soitwillbesaved asthechannel name.
- To register a new sensor, use the arrow keys
channelthat you previouslyset on the relevant sensor(see chapter4).
With the select buttons o
select the „Yes/No" option via arrow keys
select buttons/keys
- Us e theReturn k eySto return tothesettings m enu.

5.5. Settings menu "Backlight"

- Onthe set-up/settings page,press the down button
highlighted. Select it with the buttons
display lighting.
- Here,you can set the automatic display switch by entering the switch-on and switch-off times
on the left and then activatingthe timer (set the checkmarkat "Automaticcontrol backlight" with
the buttons o
Onthe right,youcanadjustthe display'sbrightnessautomaticallyin accordancewith the ambient
brightness(check„Automaticbrightness"with the
minimum brightness.
66
sensors.
Setup
twe
, you can deletecharacters in the namefield.
e , you can call up the query "Register new sensor ChannelX?"/
e
page" until t hefield"Multi-channel
and you will reach the set-up/setting menu for
Backspace es
Caps Lock es
thedesired c hannel (itsname f ieldishighlighted) and select
to confirm.
in the column "Registration" and select the
followed by a confirmation by the use of the
until the field "Backlight" is reachedand
This will lead you to the set-up/settings menu for
buttons). Y oumayalsosetthe maximum/
sensor" isreached