Change The Soldering Tip; Insert/Remove The Battery; Operation; Switching On/Off - Parkside Plsa 20 Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

˜ Change the soldering tip
m CAUTION! RISK OF BURNS!
Never heat the soldering iron
u
Switch off the product and let the soldering tip
u
before you remove the soldering tip
Loosen and remove the retaining nut
Pull the fixing sleeve

Change the soldering tip

Proceed in the reverse order to reassemble the soldering iron
˜ Insert/remove the battery
Push the charged battery
battery clicks into place audibly.
5 ] [
Press and hold the release button
˜ Operation
˜ Switching on/off
Switching on
Press the on/off switch
The soldering iron
As soon as the status LED
iron is ready for use.
[ 1 ]
without a soldering tip
[ 1 ]
off the soldering iron
[ ]
.
[ ]
into the soldering station. The
[ 5 ]
8 ] [
. The status LED
[ 6 ]
heats up.
1 ] [
lights up green, the soldering
[ 7 ]
cool down
[ ]
.
[ ]
.
9 ] [
.
1 ] [
to remove the battery
flashes red rapidly.
7 ] [
.
[ ]
.
1 ] [
.
5 ] [
GB/IE 31