Switching Off - Parkside Plsa 20 Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

NOTE
After approx. 10 minutes, the product switches off automatically
u
and reverts to cooling mode. Press the on/off switch
reheat the product.
Before using the soldering station for the first time and before
u
using a new soldering tip, the soldering tip
tinned.
Switching off
NOTE
After use, always put the soldering iron
u
holder .
3 ] [
After the status LED
u
in the holder
Press the on/off switch
for approx. 10 minutes. This is the cool-down mode. The cool-
down mode is intended to warn the user that the soldering iron
is still hot.
When the product is not in use, remove the battery
32 GB/IE
has gone out, leave the soldering iron
7 ] [
for at least 30 minutes to cool down.
3 ] [
. The status LED
6 ] [
again to
[ 6 ]
must first be
[ ]
back into the
1 ] [
flashes red slowly
7 ] [
.
5 ] [
1 ] [
1 ] [