en
Please note
•
Only use in cleaned condition (see also section 8). Check for damage after cleaning.
•
Do not use during pregnancy because expressing can trigger contractions.
•
Wash hands thoroughly with soap before use.
3.
Assembly
1.
Fit the lip valve (h) onto the collection cup (f) as shown. Ensure the correct orientation of the lip valve.
2.
Insert the silicone diaphragm (c) into the collection cup (f) as shown and press down firmly.
3.
Insert the breast shell (a) into the collection cup (f). The notches (marked with arrows below) must be aligned.
Using both hands, pull the entire rim of the breast shell (a) over the edge of the collection cup (f) and press firmly into place.
4.
Fit the pump motor (b) as shown. Press firmly into place.
4