Silvercrest SOUND MINI Bedienungs- Und Sicherheitshinweise Seite 39

Press the
then by default set it as the "primary" unit. A beep will
sound. When pairing between both products has been
carried out successfully, the LED 1 of the connected
"secondary" unit stops flashing and a sequence of beeps
will sound.
The "primary" unit LED 1 will still be flashing waiting to
pair with the playback device. Once the "primary unit"
has successfully paired with the playback device both
the "primary" and "secondary" units can be played and
controlled synchronously during Bluetooth
mode.
Press the
connection, the LED 1 on the connected "secondary"
unit flashes and a signal tone sequence sounds.
NOTE: The product which had its
first will become the "primary" unit (in the left audio
channel), and the other unit will then by default becone the
"secondary" unit (in the right audio channnel).
˜ Cleaning
Switch the product off and remove all cables before
cleaning.
Only clean the outside of the product using a clean,
dry cloth for cleaning the product and never use any
corrosive liquids / abrasive cleaning agents. Use a
slightly moistened cloth and a mild cleaning agent to
remove stubborn dirt.
When cleaning the speaker, the USB/AUX-IN cover
should be closed.)
40 GB/IE
button 3 on one of the products which will
button 3 again to break the TWS pairing
playback
®
button 3 pressed