Silvercrest SOUND MINI Bedienungs- Und Sicherheitshinweise Seite 38

˜ Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 10 has a
higher priority over a Bluetooth
Once the AUX cable 14 is plugged into the AUX-in
jack 10 , the Bluetooth
disconnected. Music playback is now switched to AUX-in
only and the LED 1 lights up green.
If the product is off, press the
the signal LED 1 lights up green and a signal tone
sequence sounds.
Switch the playback device on and start playback.
Set the highest possible volume on the playback device.
Then adjust the volume with the +/- buttons
the speaker.
˜ Switching between AUX-in
and Bluetooth
To resume music playback via Bluetooth
unplug the AUX cable 14 from the AUX-in jack 10 .
The product will then search for the previously paired
playback device (if any) and re-establish the Bluetooth
connection automatically.
˜ TWS pairing
NOTE: The TWS (True Wireless Stereo) function is only
available if two of these products have been purchased and
both have the same model number.
Turn on both products and make sure they are both not
connected to another device via Bluetooth
connection.
®
wireless connection will be
®
button 2 until
connections
®
6 5
on
connection
®
.
®
GB/IE
®
39