imilab EC6 Panorama Bedienungsanleitung Seite 8

Installing the Device
The device can be mounted on walls, ceilings, or poles.
• Wall mounting
1. Attach the wall mounting positioning sticker on the desired
installation location on a wall. Drill two holes at the positions
indicated on the sticker. The drilling diameter should be around
6.0 mm with a depth of around 30 mm.
2. Insert two plastic expansion nuts into the wall. Put the base
plate on the wall. Secure the base plate by inserting the screws
into the expansion nuts.
Note: The product must be hung horizontally after installation
(see below).
6