imilab EC6 Panorama Bedienungsanleitung Seite 7

• Installing the MicroSD card
Ensure that the camera is disconnected from the power supply.
Remove the protective case and expose the MicroSD card slot.
Insert the microSD card into the card slot in the direction as
illustrated.
Note:
When inserting or removing the MicroSD card, please disconnect
the camera from the power supply. Use a MicroSD card from a
reputable manufacturer (up to 256GB). The recommended read
and write speed of the MicroSD card is at least U1/Class 10.
Note: After installing the MicroSD card or resetting the device,
close the waterproof cover tightly before using it.
RESET
5