ZIEHL-ABEGG DN Serie Montageanleitung Seite 14

UKCA Declaration of Incorporation
as defined by the Supply of Machinery (Safety) Regulations 2008
No. 1597, PART 2 / Annex II B
The design of the incomplete machine:
•
Axial fan DN.., FA.., FB.., FC.., FE.., FF.., FG.., FH.., FL.., FN.., FP.., FS.., FT.., FV.., VN.., VR.., ZC.., ZF.., ZG..,
ZN..
•
Centrifugal fan ER.., GR.., HR.., RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ.., WR..
•
Cross-flow fan QD.., QG.., QK.., QR.., QT..,
The motor type:
•
Asynchronous internal or external rotor motor (also with integrated frequency inverter)
•
Electronically commutated internal or external rotor motor (also with integrated EC controller)
complies with the requirements in Annex I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in Supply of Machinery (Safety)
Regulations 2008 No. 1597.
The manufacturer is
The following harmonised standards have been used:
EN 60204-1:2018
EN ISO 12100:2010
EN ISO 13857:2019
Note:
The specific technical documentation in accordance with Annex VII B has been written and is available in its
entirety.
The following persons are authorized to compile the technical documents, address see above.
The specific documentation will be transmitted to the official authorities on justified request. The transmission can
be electronic, on data carriers or on paper. All industrial property rights remain with the above-mentioned
manufacturer.
It is prohibited to commission this incomplete machine until it has been secured that the machine into
which it was incorporated complies with the stipulations of the Machinery (Safety) Regulations.
Künzelsau, 27.04.2022
(location, date of issue)
ZIEHL-ABEGG SE
Tobias Gauss
Deputy Head of Technics Ventilation Technology
(name, function)
(signature)
ZIEHL-ABEGG SE
Heinz-Ziehl-Straße
D-74653 Künzelsau
Safety of machinery; electrical equipment of machines; Part 1:
General requirements
Safety of machinery - General principles for design - Risk assess-
ment and risk reduction
Safety of machinery; safety distances to prevent danger zones
being reached by the upper limbs
The maintenance of the EN ISO 13857:2019 relates only to the
installed accidental contact protection, provided that it is part of the
scope of delivery.
ZIEHL-ABEGG SE
Moritz Krämer
Head of Electrical Systems
(name, function)
(signature)
- Original -
(english)
ZA87_UK-GB
2022/17 Index 002