Prior To Startup; Setting The Operating Temperature - Beko Rbi 6306 Hcs Bedienungsanleitung

Prior to startup

Before you begin operating your device, the
following points should be re-checked for
safety:
• Is the device standing properly on the floor?
• Is there sufficient space for good air
circulation?
• Is the interior clean? (Also see the section
"Cleaning and care")
• Set the thermostat knob half way between
I and 5 or Min. and
• Now connect the
The compressor is turned on; the interior light
comes on when the door is opened.
Do not place foodstuff into the refrigerator until
the temperature has reached the desired level.
Setting the operating
temperature
(Fig. 2)
The operating temperature is regulated by the
temperature control.
Warm
2
(Or) Min.
1 = Lowest cooling setting (Warmest setting)
5 = Highest cooling setting (Coldest setting)
(Or)
Min. = Lowest cooling
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
Max.
device to the mains.
3 4 5
Max.
setting
The average temperature inside the fridge
should be around
Please choose the setting according to the
desired temperature.
You can stop operation of your device by
adjusting the thermostat knob to "0" position.
Please note that there
temperatures
The coldest region is immediately above the
vegetable compartment.
The interior temperature
ambient temperature, the frequency with which
the door is opened and the amount of foods
kept inside.
Frequently opening the door causes the interior
temperature
For this reason, it is recommended
the door again as soon as possible after use.
Cold
4
+50C.
will be different
in the cooling area.
also depends
to rise.
on
to close