Dreame L10s Pro Benutzerhandbuch Seite 5

Please use this product in accordance with the instructions in the User Manual.
•
Users are responsible for any loss or damage that arise from improper use of this
product.
Batteries and Charging
Do not use any third-party battery, charger, or charging dock. Use only with RCS0
•
supply unit.
Do not attempt to disassemble, repair, or modify the battery or charging dock on
•
your own.
Do not place the charging dock near a heat source.
•
Do not use a wet cloth or wet hands to wipe or clean the dock's charging
•
contacts.
Do not improperly dispose of old batteries. Unneeded batteries should be
•
discarded at an appropriate recycling facility.
If the robot will not be used for an extended period, fully charge it, then turn it off
•
and store in a cool, dry place. Recharge the robot at least once very 3 months to
avoid over-discharging battery.
This product contains batteries that can only be replaced by qualified technicians
•
or after-sales service.
The lithium-ion battery pack contains substances that are hazardous to the
•
environment. Before disposing of the robot vacuum, please first remove the
battery pack, then discard, or recycle it in accordance with local laws and
regulations of the country or region it is used in.
When removing the batteries from the product, it is better to use up the batteries
•
and make sure your product is disconnected form power. Uninstall the screw on
the bottom, then remove the cover.
Unplug the battery connector, then remove the batteries. Do not damage the
•
battery case to avoid any risk of injuries.
Return the batteries to a professional recycling organization.
•
Laser Safety Information
The laser distance sensor complies with the IEC 60825-1:2014 standard for Class
•
1 laser products and does not generate dangerous laser radiation.
5