Dreame L10s Pro Benutzerhandbuch Seite 24

Robot does not
perform scheduled
cleaning
Does leaving the
robot on the
charging dock
consume power if it
is already fully
charged?
No water comes
out of the water
tank, or only a little
bit comes out
The mop pad stops
rotating
Robot doesn't
resume cleaning
after charging
Robot doesn't
return to charging
dock after being
moved
Specifications
Robot
Model
Charging Time
Rated Voltage
Rated Power
Operation Frequency
Maximum Output Power
Robot has low battery. Scheduled cleaning will not start unless
the robot has at least 15% battery left.
Leaving the robot on the charging dock after it's fully charged
consumes very little electricity and helps maintain optimal
battery performance.
Confirm that the water tank is filled with water and clean the
mop if necessary.
Clean the mop pad if it becomes dirty.
Make sure the mop pad is installed correctly according to the
user manual.
Clean the airhole on the top of the water tank.
A foreign object is caught in the mop pad. Please clean it.
Make sure the robot is not set to Do Not Disturb Mode, which
will prevent it from resuming cleaning. The robot does not
resume cleaning when it is manually recharged or placed onto
the charging dock.
Moving the robot may cause it to re-position itself or re-map its
surrounding. If the robot is too far from the charging dock, it
might not be able to automatically return on its own, in which
case you need to manually place the robot onto the charging
dock.
RLS6S
Approx. 6 hours
14.4V
60W
2400-2483.5 MHz
< 20 dBm
24