Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- To clean the filter, use a fine brush and carefully brush the filter. Alternatively or additionally, the
filter can also be washed briefly under running water (no cleaning agent). Then let the filter dry
thoroughly before reinstalling it.
- After cleaning, replace the filter and close the dust container again (Fig. 4-6).
Abb. 1
Abb. 4
Cleaning the housing:
- Unplug the power cord.
The device, the power cord and the plug must never be immersed or rinsed in water or other
-
liquids! RISK OF ELECTRIC SHOCK!
- Clean the housing with a damp (not wet!) cloth. Use pure water or perhaps a few drops of a mild
detergent. Make sure that no moisture penetrates into the interior of the device (ventilation slots).
- Do not use aggressive, caustic, alcohol- or petrol-based cleaning agents and avoid very hot water.
- Do not use abrasive cleaning utensils to avoid damaging the surfaces.
Abb. 2
Abb. 5
17
Abb. 3
Abb. 6
Werbung
