Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- Only use the device as described in this manual. Any use other than that for which it was intended
or incorrect use is not considered to be in accordance with the intended use. We cannot accept
liability for any resulting damage to the device, other objects or persons, and any warranty claims
will be void.
- The device may only be connected to a correctly installed, freely
accessible protective contact socket.
- The mains voltage must correspond to the voltage indicated on
the rating plate of the device: 220-240 V ~ 50-60 Hz.
- The device complies with the directives that are binding for the
CE marking.
- Please note that the device is not completely disconnected from
the mains after switching off, only after pulling out the power
plug!
- We recommend connecting the device to a single socket and avoiding connecting other
consumers to the same line (fuse).
- If the power cord and/or plug are damaged, the device must not be used.
Unpacking the device:
- Remove all packaging material and security tape from the device.
- Packaging materials such as plastic bags or polystyrene parts are dangerous for children. Therefore,
keep these parts away from children. HAZARD OF SUFFERING!
- Many packaging materials are recycled – so make sure they are disposed of correctly, as you are
making an important contribution to protecting the environment
Connect the hose to the vacuum cleaner:
Insert the end of the hose into the hose connector on the device. Turn the end of the hose slightly
clockwise to lock the hose.
To remove the hose from the vacuum cleaner, press the two tabs on the end of the hose at the same
time and remove the hose by pulling gently.
- Attach the suction pipe to the end of the suction hose.
Mains connection
Assembling the device
14
Werbung
