Werbung
3.3 Storage cap
If the probe has been out of the electrolyte gel for a longer period
of time, it must be stored in the electrolyte gel for approx. 12
hours to regenerate.
The storage cap can also be attached to the wall/transport brack-
et.
3.4 Wall/Transport bracket
4. Initial Operation
Insert battery
4 Remove protection strip on the storage cap.
The storage cap filled with electrolyte gel is
used to store the probe between measure-
ments.
The probe is only immediately ready to
operate if stored in electrolyte gel.
The wall/transport bracket with belt holder
and attachment unit for the storage cap is
used for the safe storage of the measure-
ment instrument at a fixed point or during
transport.
1 Remove battery compartment.
2 Insert batteries (4 x Type LR44). Watch
out f f or + + /-! !
3 Push battery compartment back in.
3. Product Description 21
Werbung
