GreenWorks GD24X2BCB Bedienungshandbuch Seite 14

EN
Problem
Poor cutting perform-
ance
9 TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting line di-
ameter
Cutting path di-
ameter
Weight (without
battery pack(s)
and charger)
Battery model
Charger model
Grass trimmer
Brush cutter
Possible Cause
Cutting blade incorrectly fitted
Cutting guard encrusted with debris
Cutting blade blunt
2x24 V
6300 ±10% / 5500 ±10% min
(Grass trimmer),6400 ±10% min
(Brush cutter)
Bump feed / Brush cutter blade
2.0 mm
330 / 381mm (Grass trimmer),
260 mm (Brush cutter)
3.75 kg
G24B2, G24B4 and other BAG
series
G24C, G24UC2, G24X2UC2,
G24X2UC4 and other CAG series
Measured L = 87 dB(A),
PA
sound pressure K = 3 dB(A)
pA
level
Guaranteed L = 96 dB(A)
WA.d
sound power
level
Vibration < 2.5 m/s
2
1.5 m/s
Measured L = 85 dB(A),
PA
sound pressure K= 3 dB(A)
level
Guaranteed L = 96 dB(A)
WA.d
sound power
level
Vibration < 2.5 m/s
2
1.5 m/s
English
Solution
Remove cutting blade and refit in a fully central
position. Use guide rings on the blade to ensure
correct central alignment.
Clean inside of cutting guard
Flip/replace blade
XX
-1
10 WARRANTY
-1
(The full warranty terms and conditions can be found
on Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
11 EC DECLARATION OF CONFORMITY
Name and address of the manufacturer:
Name:
Address:
2
, k=
Name and address of the person authorised to compile
the technical file:
Name:
Address:
2
, k=
Herewith we declare that the product
10
96 dB. Noise value. (Grass trimmer)
96 dB. Noise value. (Brush cutter)
Globe Technologies Europe GmbH
Brunnenweg 17, 64331 Weiterstadt,
Germany
Ralf Pankalla
Brunnenweg 17, 64331 Weiterstadt,
Germany