Herunterladen Diese Seite drucken

Minolta MULTI-FUNCTION BACK Bedienungsanleitung Seite 23

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CARE AND STORAGE
• The Multi-Function Back is designed for use
at temperatures between —10°C and 50°C.
If the unit becomes colder or hotter than
this, operation may be unsatisfactory.
• Longer
response
time
below
0°C
and
diminished contrast above 50°C may make
the display difficult to read. At even higher
temperatures
the whole
LCD may turn
black.
• Do not press on or damage the liquid-crystal
display window.
• Never attempt to disassemble the unit. Any
repairs necessary should be undertaken only
by an authorized Minolta service facility.
• The unit should never be placed or left in
the glove compartment or other places in a
motor vehicle, or elsewhere, where it may
be subject to temperatures higher than 55°C
or lower than —20°C. Particular care should
be taken not to leave the unit in sunlight or
19
near sources of heat such as stoves, strong
lights, etc. Do not store it in humid places
or near corrosive chemicals.
• The unit's body (except pressure plate) may
be wiped with a silicone-treated cloth to
clean it. Do not allow alcohol or chemicals
of any other kind to touch its surface.
• When the unit is stored, place it in its
original packaging and put it in an airtight
container with an appropriate amount of
dehumidifying agent, such as silica gel.
• The
life of the liquid-crystal display is
approximately five years. When the contrast
decreases and the display becomes difficult
to read, have the panel replaced by an
authorized Minolta service facility.

Werbung

loading