Herunterladen Diese Seite drucken

Minolta MULTI-FUNCTION BACK Bedienungsanleitung Seite 17

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

13
INTERVAL
interval of shutter releasing
'**
n i D n n n
u (
J u U U
• Set at 00 00 00 or desired value (up to 99 hrs., 59 min., 59 sec.).
• FRAMES must be set at more than one.
• Use Auto Winder G or Motor Drive 1. (Manual winding is also possible if INTERVAL is long.)
• INTERVAL must be greater than shutter speed plus winding time; if not, FII operation will stop.
If speed likely to be set by camera in P or A mode or speed you set in M mode is less than 1/2
sec., set INTERVAL at at least 2 sec.
FRAMES
number of pictures to be taken
♦ ♦
n n n n 3 c
u u
u u CD
F
• Set at 00 00 01 or higher.
• When set at more than one frame, use Auto Winder G or Motor Drive 1
• Winder and motor drive will automatically stop at end of film. If f
closed within INTERVAL setting, operation will continue (without hj
again). If back is still open when next signal is given, FII operation will
1.
Ilm Is changed and back is
aving to press (
$
)
be cancelled.
LONG EXPOSURE
control of time exposures
n n n t
n iV
U U U 1
J
u
• Set at 00 00 00 or desired value. (If camera batteries become exhausted before set time has
elapsed, shutter will close. With fresh lithium battery in camera, maximum long-exposure at 20° C
is approx. 6 hrs.; with other battery types, approx. 3 hrs.)
• Set mode/shutter-speed selector of camera at "B"; if not, operation will not be as intended and
film may be wasted.
• When used with INTERVAL mode, LONG EXP. must be less than INTERVAL.

Werbung

loading