Anleitung_
210
SPK7
:
LHS
8.2 Carbon
brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Caution: The carbon brushes should not be replaced
by anyone but a qualified electrician.
8.3 Servicing
There are no parts inside the appliance which require
additional
maintenance.
8.4 Ordering
replacement
parts:
Please provide the following
information
on all orders
for spare parts:
•
Model/type of the appliance
Article number of the appliance
ID number Ofthe appliance
Spare part number Ofthe required spare part
For our latest prices and information please go to
www.isc-gmbh.info
8.5 Changing the brush ring (Fig. 9/10)
Loosen
the six screws
with a screwdriver.
Lift the brush ring carefully out with the screwdriver.
To assemble
the new brush ring proceed in reverse
order.
9. Disposal
and recycling
The appliance
is supplied in packaging to prevent its
being damaged
in transit. This packaging
is raw
material
and can therefore
be reused
or can be
returned to the raw material system.
The appliance and its accessories are made Of
various types Ofmaterial, such as metal and plastic.
Defective components must be disposed Ofas
special waste. Ask your dealer or your local council.
19.
.2009
8:
25
Uhr
Seite
11
11