Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O
O
Quickly press
twice
Quickly press
4 times
(9
Hold down
• 14.
NOTES
1.The alarm will enter the searching mode or the pairing mode for 60 seconds with the LED flashing red. After 60
seconds, repeat Step 2 to connect the alarms. If needed, press the test/silence button once while the alarm is in the
searching mode or the pairing mode, and the LED will Stop flashing red and the alarm will quit the pairing mode to
enter normal
Status.
2. Test all wireless alarms to ensure they are interconnected before installation.
3. A maximum
Of 24 wireless
4. The model can only be interconnected with other X-SenseLink* wireless interlinked alarms.
Quickly press
How
to Disconnect
Quickly pressthe Test/SiIence button 4 times; the alarm will beep once,Then, ho d down the button until it beeps once more
to disconnect. After disconnecting, it can be reconnected to the same nenwork,or added to a new network.
NOTE:The X-SenseLink* wireless interlinked alarms in one multi-pack have already been interconnected. TOcreate a
new network, you will first need to disconnect each alarm individually in this mufti-pack to avoid having them all join
the same network.
alarms
can
be interconnected
on the same
network.
.15.
Werbung
