x-sense XC01-M Bedienungsanleitung Seite 7

Connect the ProConnected Carbon Monoxide
The ProConnected Carbon Monoxide Alarm can be connected to the basestation through the wireless network. When the
alarm is connected to the basestation, you can receive push notifications wherever you areto stay informed of the device
status, and to silence an alarm from your smartphone.
NOTE:Before adding devices to the system, make sure the base station has been successfully added to the app.
1_Tap select "Carbon Monoxide Alarms', and then select "ProConnected COAlarms (working with SBS50BaseStation)" in the
product list.Then,tap "Next" to enter the pairing page.
2. Follow the prompts on the page by quickly pressing the test/silence button twice on the alarm until the LEDflashes green
rapid y, ind'cating that the device is waiting to connect to the Wi-F
3. Tap "Next" to add the device.You wil hear "Readyto add the device."
4. After successfuly connected, you will hear "Deviceadded" and the "Device added" page will appear.Then you can find the
carbon monoxide alarm in the device list.
5. f you want to add multiple devices into the system, please repeatthe above steps.
NOTE:If you fail to add the carbon monoxide alarm to the network within 60 seconds, the device will automatically
exit the network configuration. To re-enter the network configuration, you need to repeat the above steps.
Alarm to the Base Station
.10.
The LED indicator
o
will flash green
Interconnect the Alarms Without
f you don't want to add the carbon monoxide alarmsto the basestation, you can connect the carbon monoxide alarms using
RFtechnology to create an interconnected alarm system.However,you will no onger be able to receive push notifications on
your phone from the X-SenseHome Security app.
NOTE:The XCO1-M carbon monoxide alarms are part ofthe Link series and can be connected to the X-Sense Link
alarms using wireless interconnection without being connected to the base station.
Quickly pressthe test/silence
button twice
Adding to the Base Station
.11.