Werbung
Product Operation
Scheduling
You can schedule to let the robot start cleaning from a certain time.
1.
1.
Point the remote control towards the robot
(make sure the robot is turned on).
2.
Press the
and use the directional buttons to set the specific time.
3.
Press the
2.
Once the schedule is successfully set, the robot will start cleaning at the scheduled
time every day. If the robot is turned off, the schedule will be cleared, and you need
to set it up again.
1.
Point the remote control towards the robot
(make sure the robot is turned on).
2.
Press the
3.
Then use the directional buttons to set the specific cleaning time.
4.
Press the
NOTE
When you set the clock time or schedule, the final operation willbe confirmed by
beep from robot; If no tone is played, the setting was unsuccessful.
18
Setting the clock time
button on the remote control to enter clock settings
button to save the setting.
Setting a schedule
button on the remote control to enter scheduling settings
button to save the schedule.
Find more information at www.zaco.eu
English EN
Werbung
