Dmx Operation - EuroLite LED PIXEL POLE Bedienungsanleitung

DMX Operation

► Setting the DMX Starting Address
To the control the controller from a DMX512 lighting controller, adjust the DMX start address for its first DMX
channel.
1
Press MODE to call the menu and select <DMX Address> with the buttons UP and DOWN. Confirm
with ENTER.
2
Use the buttons UP and DOWN to set the address to <001> and confirm with ENTER. The DMX
indicator next to the display will blink slowly when DMX signals are being received. If no control signals
are available, the indicator will be flashing rapidly.
► Functions in DMX Mode
Chanel DMX value
1 0-255
000-010
2
011-255
3 0-255
4 0-255
5 0-255
000-015
016-031
032-047
048-063
064-079
080-095
096-111
6
112-127
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255
000-015
016-031
032-047
048-063
064-079
080-095
096-111
112-127
7
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255
8 0-255
Note: The dimmer function (CH 1) must be set to 0 in order to run the programs under CH 6 and CH 7.
www.eurolite.de
Function
Dimmer (0-100 %)
No function
Strobe slow fast
Red dark bright
Green dark bright
Blue dark bright
No function
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Program 13
Program 14
Program 15
No function
Program 16
Program 17
Program 18
Program 19
Program 20
Program 21
Program 22
Program 23
Program 24
Program 25
Program 26
Program 27
Program 28
Program 29
Programs1-29 in a loop
Program running speed (CH 6 and CH 7) slow
21
fast