4
INSTALLATION
Suspended installation by experienced and trained persons only. Incorrect installations are a
potential danger, especially if systems are flown above persons.
Please consider the EN 60598-2-17and the respective national standards during the
installation! The installation must only be carried out by an authorized dealer!
Wall Installation
Mount the bars to a wall or ceiling using the mounting clips and fix the control unit at a suitable place with
two screws.
1
Hold the bar carefully in position and place the mounting clips over the luminary.
2
Screw the clips into the installation surface until the device is firmly fixed.
Truss Installation
For mounting the bars to a truss, you will need special mounting brackets available through your retailer.
1
Attach the rounded section of the bracket on the trussing.
2
Carefully clip the bar into the holder.
www.eurolite.de
DANGER TO LIFE!
DANGER TO LIFE!
Wall and ceiling installation
Truss installation
17