Werbung
4.1.1 i-Log control panel
Fig.
4.1.1 i-Log control panel
Start compressor
Stop compressor
Back to the main menu
Accept value / manually switch between loaded and idle running
4.1.2 4.1.2 LCD indicator
LED indicators.
When switched on, the LCD display shows the following:
COMPRAG SCREW
AIR COMPRESSOR
The main parameters of the compressor are displayed after 5 seconds:
18
www.comprag.com
DOWN VALUE
SET
Power indicator (red): The indicator lights up when the control is switched on and
the power supply is connected.
Power indicator (green): The indicator lights up when the motor is running.
Alarm/error indicator (red). Alarm (warning): The indicator flashes and the ma-
chine continues to run. Error: The indicator is permanently lit, there is an accom-
panying acoustic signal and the machine switches off. The error message can be
acknowledged after the cause of the error has been resolved. In order to acknowl-
edge the error message, press and hold the 'back to main menu' button
i
-LOG control
UP VALUE
ENTER
RETURN
Up or increase value
Down or reduce value
Save setting
START
SHUTDOWN
Version 2.3
.
Werbung
