Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Warmly Reminding and Daily Maintenance
Wait for the printed model to cool down and
1
pick out from internal equipment with the
flexible platform, and the platform is slightly
curved in parts to make the model and
platform separated. (The platform shouldn't
be bent too much to prevent the platform
from being deformed and unusable)
Clean the sundries on the
4
4
printer surface regularly.
Remains of platform consumables can be
2
scraped off with a blade. Pay attention to
safety when using.
Warmly reminding: when the device has been printed for more
than 300 hours or the printing platform or nozzle has been
replaced, the distance between the platform and the nozzle maybe
changed so that the first layer of the model is not pasted firmly,
resulting in printing failed, please calibrate the platform regularly.
Warmly reminding: the printing platform is a consumable part. It is
recommended to replace it regularly to ensure that the first layer
of the model is attached.
When printing small models, it is recom-
3
mended to evenly apply adhesive gel on
the surface of the platform, which is helpful
to improve the viscosity of the first layer of
model printing.
21
Werbung
