Artillery Sidewinder X4 Plus Bedienungsanleitung Seite 18

4.Printing for The First Time
4.2 Printing Files
Select the "Plater" page in the menu bar.
1
Drag and drop STL files (or other supported formats) to slicing
2
software, or select "File"-> "Import"-> Import corresponding model
files in the menu bar. Click the "Slice Now" key in the lower right
corner to slice the model.
Data such as printing time and consumables will be displayed after
3
the model slicing is completed. After checking that there is no
problem with the slice model, click "Export G-code" in the lower right
corner and press the key to export the file.
Click the "Save" key to save the slice file to the removable disk or
4
USB flash drive.
15