Technical Data - Meec Tools 027161 Bedienungsanleitung

8

Technical data

Specification
Voltage
Speed
Cutting width
Line diameter
Length
Weight
Sound pressure level, LpA
Measured sound power level,
LwA
Guaranteed sound power level,
LwA
Vibration level
1
Warning! Always wear hearing protection!
Warning! The actual vibration and noise level when
using tools may differ from the specified maximum value,
depending on how the tool is used and the material. It is
therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of
exposure in actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when the tool is
switched off and when it is idling, in addition to the start-up
time).
1 The declared values for vibration and noise,
which have been measured according to a
standardized test method, can be used to
compare different tools with each other and for a pre-
liminary assessment of exposure. The measurement
values have been determined in accordance with
EN 50636-2-91:2014.
32
Value
18 VDC
8500/9000 /min
25 cm spool,
24 cm plastic blade
1.6 mm
123 cm
1.825 kg
82.1 dB(A), K=3 dB
92.5 dB(A), K=3 dB
96 dB(A)
3.261 m/s², K=1.5 m/s²