AWG EVO Originalbetriebsanleitung Seite 29

AWG | Nozzles | Turbo nozzle EVO
2 Safety Information
The AWG turbo nozzles EVO described here are in line with the state of
the art as well as the recognised safety regulations. The safety and health
protection requirements have been met. Nevertheless, its use may give
rise to hazards for the user or third parties or cause damage to the device
itself or other material assets.
2 .1 General safety instructions
>
The device may only be operated in accordance with these instructions
and in perfect condition.
>
The operators must have received the necessary training to be able
to handle the device properly.
>
Unauthorized modifications or the installation of additional components
not approved by the manufacturer endanger the proper functioning of
the device.
– Modifications to the device are prohibited
– Only use accessories approved by the manufacturer
>
The operator is responsible for safety in the vicinity of the device, in
particular for compliance with the general safety regulations. This
includes ensuring, before using the device, that all protective devices
are fully in place and functional.
2 .2 Safety during operation
>
Observe all safety rules and protective measures applicable for use
at the place of use.
>
Make sure the device does not get damaged during transport, instal-
lation, commissioning, operation or maintenance.
>
The safety regulations laid down in the country-specific service regu-
lations for fire-fighters (for example in Germany the Feuerwehrdienst-
vorschrift FwDV) or the corresponding internal company regulations
must be observed.
29
SafETy INfORmaTION
M1129B10 | Rev. 02-08/24