Maintenance; Inspection And Maintenance; Repair; Disposal - Awg Fd Z2 Originalbetriebsanleitung

AWG | Fittings | Inductors FD Z2 and Z4
7

Maintenance

7 .1

Inspection and maintenance

Apart from the visual inspection and cleaning of the AWG Inductors, no
regular maintenance work is required.
7 .2

Repair

Any repair work on the AWG Inductors may only be performed by the AWG
Fittings GmbH customer service or by an authorised specialist workshop.
If you need technical support, please contact our Service Centre:
AWG Fittings GmbH
Service Centre
D-89177 Ballendorf
Telephone: +49 (0) 73 40 / 91 88 98 880
Email: awg-service@idexcorp.com
We will accept devices in need of repair or maintenance, discuss with you
the quickest and cheapest solution, create cost estimates, take care of the
execution of the repair work and are at your disposal for any questions.
7 .3

Disposal

Observe the local regulations regarding proper waste recycling or disposal.
Materials
Nozzle body, setting sleeve: Aluminium, black anodised
Internal parts:
Seals:
Base stand:
Storz adapters:
M1008B10 | Rev. 03-08/24
Polyoxymethylen (POM) plastic
NBR
Cast aluminium, powder-coated in red
Aluminium, anodised
maintEnancE
38