AWG FD Z2 Originalbetriebsanleitung Seite 31

AWG | Fittings | Inductors FD Z2 and Z4
IMPORTANT
Foaming agent product information
Observe the information on health hazards and potential environmen-
tal hazards (e.g. water hazard class) provided in the safety data sheet
and other product information for the foam agent used.
The operator must ensure that the aspirated quantity of the foam
agent is sufficient for the extinguishing application.
Orientation of the inductor
The suction function of the induc-
tor is assured in any installation or
operating position, including vertical
or overhead.
The rotatable admixing unit facilita-
tes kink-free connection of the pick
tube to the foam agent canister.
If the admixing unit is optimally alig-
ned, the position of the admixing
unit can be fixed on the underside
of the support foot by means of a
threaded pin (Fig. 2/1).
31
Use of different foam agents
Foam agents from different manufacturers and different
products or types must not be mixed. Applied extinguishing
foams are compatible without any problems.
1 2
11
Legend
1 Threaded pin
2
Mounting holes
Fig. 2 Installation
M1008B10 | Rev. 03-08/24
uSE
74