Transport In A Vehicle, Storage; Use; Notes - Awg Fd Z2 Originalbetriebsanleitung

AWG | Fittings | Inductors FD Z2 and Z4
The inductor is delivered ready to be connected and is immediately ready
for use in an extinguishing system after connecting with a suitable adapter.
No special commissioning is required before first use.
4 .2

Transport in a vehicle, storage

The inductor has run dry.
9
The inductor can be transported and stored in any position.
Especially during transport inside a vehicle, the inductor must not fall
over. If necessary, secure the inductor using a belt. During transport, the
inductor must not be damaged by other heavy equipment.
To ensure proper functioning, the inductor may only be stored in a clean
condition.
5

Use

5 .1

Notes

WARNING
Hazards during use
The handling of foam agents or other additives can be hazardous to
health.
– Wear personal protective equipment in accordance with fire service
regulations.
– Always wear eye protection.
CAUTION
Attach adapters correctly
Danger of injury due to loosening of adapter connections.
– Always insert the adapters up to the stop and couple them fully.
M1008B10 | Rev. 03-08/24
uSE
30