Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OTHER FUNCTIONS OF THE MOBILE APPLICATION
After clicking on the "More" button, you can choose from other functions. We only list some important
functions.
Remote control: serves for manual control of the movement of the vacuum cleaner.
Change map: displays a list of current or saved maps. You can save or delete the current map, or
change the current map by selecting from the saved list.
Carpet detection: serves to automatically increase the vacuuming performance if the vacuum cleaner
detects a carpet.
Custom mode: used to set the mode selection or vacuuming and mopping performance in individual
rooms/zones.
Continuation of cleaning: if the battery runs out during cleaning, the vacuum cleaner will automatically
go to the dump station to charge and then continue cleaning in the place where cleaning was
interrupted.
Voice and volume: used to set the language of the spoken word or the volume.
The application is constantly being developed, its features may be added, changed or removed without
notice.
DUMPING OF DUST
Automatic emptying of the robot vacuum cleaner after cleaning is completed
In the mobile phone app, click on the "More" button and select "Dust collection". Set how often you
wish to empty the dust into the "Dustbin station", the Robotic Vacuum Cleaner will automatically empty
the contents of its Dust Tray when connected to the "Dustbin station".
Manual emptying of the robotic vacuum cleaner
You can also manually dump debris in the application, click the "Start dust collection" button in the
"Debris collection" function. If the application writes "Frequent dust collection" or the robot vacuum
cleaner reports "Too frequent dust extraction, try again later", it means that the robot vacuum cleaner
is emptying the dust container too often in a short interval, so wait a while and continue after a while.
"Dustbin station" counts the number of times the robot vacuum cleaner has emptied the dust
container. 40 emptyings are set, then the next time you try to empty the dust container, the robot
vacuum will say and write "The dust bag is full, replace it". After replacing the dust bag, it will count
again from zero.
ROBOTIC VACUUM CLEANER FIRMWARE UPDATE
The firmware of the robotic vacuum cleaner is continuously improved. If a new firmware version is
available, you will be offered the option to download the update in the application and install it on the
robot vacuum cleaner.
Werbung
