Auriol 4-LD6243-1-2 Bedienungs- Und Sicherheitshinweise Seite 25

Note:
You can switch between time zone time or normal time by briefly
pressing the SET-button (19)
Setting the temperature unit °C/°F
 Press the SET button (19)
time display. °C flashes.
 Press the up button (18)
the temperature in degrees Celsius (°C) or degrees Fahrenheit (°F).
 Press the SET button (19)
settings mode.
The device will display the temperature in the set unit.
Note:
If LL. appears, the value is below the measuring range from 0 °C to
LL. LL. LL.
L L L L
50 °C (or 32 °F to 122 °F); if HH.
measuring range.
Maximum and minimum values
The maximum and minimum temperature values are recorded and
saved from the moment the batteries are inserted.
 Briefly press the up button (18)
MAX (13) of the temperature (12).
 Press the up button (18) again
MIN (13) of the temperature (12).
.
1x long and 9x short in the normal
or the down button (20)
to display
1x to confirm your entry and exit the
is displayed, it is above the
HH.
HH. HH.
H H H H
to display the maximum values
to display the minimum values
- 23 -