Vga Connection - Jvc Cl-R190 Bedienungsanleitung

VGA connection:

1
Make sure the system is turned off.
2
Connect a VGA cable between the monitor's VGA and the system's analog RGB
output.
Connect an appropriate signal cable depending on your system
environment.
To system's
VGA output
Caution
This product is intended to be connected to an IEC60601-1
certified device. To use this product without connecting to
such a device, it needs to be evaluated according to the
requirements of IEC60601-1 and IEC60601-1-1.
Continued on section
English
VGA Cable.
(This cable is not a standard accessory)
3 of Power Cord Connection
- 24 -
VGA Connector.
,
P25