Displayport Connection - Jvc Cl-R190 Bedienungsanleitung

DisplayPort connection:

1
Make sure the system is turned off.
2
Connect a DisplayPort cable between the monitor's DisplayPort and the system's
DisplayPort output.
Connect an appropriate signal cable depending on your system
environment.
Caution
This product is intended to be connected to an IEC60601-1
certified device. To use this product without connecting to
such a device, it needs to be evaluated according to the
requirements of IEC60601-1 and IEC60601-1-1.
Continued on section
DisplayPort Connector
DisplayPort Cable
3 of Power Cord Connection
- 23 -
To system's
DisplayPort output
,
P25.
English