Connecting The Cables; Dvi Connection - Jvc Cl-R190 Bedienungsanleitung

Connecting the cables

DVI connection:

1
Make sure the system is turned off.
2
Connect the supplied DVI cable between the monitor's DVI and the system's DVI
output.
Make sure to tighten the screws on the connectors.
Note
Connect an appropriate signal cable depending on your system
environment.
Caution
This product is intended to be connected to an IEC60601-1
certified device. To use this product without connecting to
such a device, it needs to be evaluated according to the
requirements of IEC60601-1 and IEC60601-1-1.
Continued on section
English
DVI Connector
DVI Cable
3 of Power Cord Connection
- 22 -
To system's
DVI output
,
P25.
s